Learn the correct way to put on a Breg knee brace to ensure proper fit and maximum comfort.
Table of Contents
Key Takeaways:
- Unfasten all the straps of the brace before application.
- Sit with your knee slightly bent and place the hinge/condyle pads at the top of the patella.
- Push the brace towards the back of your knee, ensuring the condyle pads are situated towards the back.
- Tighten each strap snugly, keeping the brace secure but not causing pain.
- For an OA brace with an adjustable dial, experiment with different levels of push for pain relief.
- Gradually increase wear time each day and week for custom braces.
- Hand wash and properly care for your brace to maintain its longevity.
Unfastening the Straps
Before putting on your Breg knee brace, make sure to unfasten all the straps for easier application. This will allow you to adjust the brace more comfortably once it’s in place. Sit on the edge of a chair with your knee slightly bent, ready to begin the process of securing the brace onto your leg.
To properly position the brace, place the middle of the hinge/condyle pads at the top of the patella, or knee cap. This ensures optimal support and alignment. Gently open the brace and push it towards the back of your knee, ensuring the condyle pads are situated towards the back as well.
Now it’s time to secure the brace. Starting with the lowest strap with the BREG logo on it, tighten each strap snugly while using your other hand to hold the brace in place on your leg. The straps should be tight enough to keep the brace securely in place, but not so tight as to cause discomfort or pain. Remember to re-tighten the anterior thigh strap once you are standing, as your leg’s shape changes from sitting to standing.
For patients using an OA brace with an adjustable dial, take the opportunity to adjust the dial to a setting that provides pain relief. Experiment with different levels of resistance to find what feels right for you. The brace is designed to unload your knee by pushing on the opposite side, slightly realigning your knee and adjusting weight bearing.
It’s important to gradually wear the brace, especially if you’re using a custom one. Similar to breaking in a new pair of shoes, gradually increase the wear time each day and week. You don’t need to wear the brace all the time; use it when needed, such as during physical activity or when you experience discomfort.
Finally, to keep your Breg knee brace in good condition, be sure to hand wash all the parts with water and mild soap. Rinse them well and allow them to dry thoroughly. When not wearing the brace, fold the Velcro straps back on themselves to prevent debris from sticking to the Velcro.
These instructions are specific to a Breg Fusion Knee Brace, but similar guidelines can be followed for other Breg knee brace models. By following these steps, you can ensure a proper fit and maximum comfort when wearing your Breg knee brace.
Proper Positioning of the Brace
Proper positioning of the Breg knee brace is crucial for optimal support and alignment. By following these steps, you can ensure that your brace fits correctly, providing the necessary stability and comfort for your knee.
- Unfasten all the straps of the brace to prepare for application.
- Sit on the edge of a chair with your knee slightly bent.
- Place the middle of the hinge/condyle pads at the top of the patella (knee cap).
- Open the brace slightly and push it towards the back of your knee, making sure the condyle pads are situated towards the back.
- Starting with the lowest strap with the BREG logo on it, tighten each strap snugly while securing the brace on your leg with your other hand. The straps should be tight enough to keep the brace in place but not too tight to cause pain. You may need to re-tighten the anterior thigh strap once you are standing since your leg’s shape changes from sitting to standing.
For patients with an OA brace that has an adjustable dial, adjust the dial to a comfortable setting that provides pain relief. Experiment with different levels of push to find what feels right for you. The brace is designed to unload your knee by pushing on the opposite side, slightly realigning your knee and adjusting weight bearing.
Custom braces may require a break-in period, like new shoes. Ease yourself into wearing the brace gradually, increasing wear time each day and week. You do not need to wear the brace all the time; wear it when needed.
To care for the brace, hand wash all parts with water and mild soap, then rinse and dry well. Fold the Velcro straps back on themselves when not wearing the brace to prevent debris from sticking to the Velcro.
Note: These instructions are specific to a Breg Fusion Knee Brace, but similar guidelines can be followed for other Breg knee brace models.
Applying the Brace
Follow these steps to correctly apply the Breg knee brace to your leg for a secure and comfortable fit.
- Unfasten all the straps of the brace.
- Sit on the edge of a chair with your knee slightly bent.
- Place the middle of the hinge/condyle pads at the top of the patella (knee cap).
- Open the brace slightly and push it towards the back of your knee, ensuring the condyle pads are situated towards the back.
- Starting with the lowest strap with the BREG logo on it, tighten each strap snugly while securing the brace on your leg with your other hand. The straps should be tight enough to keep the brace in place but not too tight to cause pain. You may need to re-tighten the anterior thigh strap once you are standing since your leg’s shape changes from sitting to standing.
- For patients with an OA brace that has an adjustable dial, adjust the dial to a comfortable setting that provides pain relief. Experiment with different levels of push to find what feels right for you. The brace is designed to unload your knee by pushing on the opposite side, slightly realigning your knee and adjusting weight bearing.
- Custom braces may require a break-in period, like new shoes. Ease yourself into wearing the brace gradually, increasing wear time each day and week. You do not need to wear the brace all the time; wear it when needed.
- To care for the brace, hand wash all parts with water and mild soap, then rinse and dry well. Fold the Velcro straps back on themselves when not wearing the brace to prevent debris from sticking to the Velcro.
Note: These instructions are specific to a Breg Fusion Knee Brace, but similar guidelines can be followed for other Breg knee brace models.
Tightening the Straps
After positioning the Breg knee brace, tighten the straps snugly for a secure fit. Start with the lowest strap that has the BREG logo on it, and work your way up to the top strap. As you tighten each strap, use your other hand to secure the brace on your leg. It’s important to find the right balance – the straps should be tight enough to keep the brace in place, but not so tight that they cause discomfort.
Remember to re-tighten the anterior thigh strap once you are standing, as the shape of your leg changes from sitting to standing. This ensures that the brace stays securely in place throughout your day.
If you are using an OA brace with an adjustable dial, take the time to find the setting that provides optimal pain relief. Experiment with different levels of push to find what feels right for you. The brace is designed to unload your knee by pushing on the opposite side, slightly realigning your knee and adjusting weight bearing.
It’s important to gradually adjust to wearing the brace, especially for custom braces. Think of it as breaking in new shoes. Start by wearing the brace for shorter periods of time, and gradually increase the wear time each day and week. Remember, you don’t need to wear the brace all the time – only when you need it.
Steps to Tighten the Straps: |
---|
1. Position the brace properly on your knee. |
2. Start with the lowest strap with the BREG logo. |
3. Tighten each strap snugly, securing the brace with your other hand. |
4. Re-tighten the anterior thigh strap when standing. |
5. If using an adjustable dial, find the setting that provides pain relief. |
6. Gradually increase wear time each day and week. |
To care for your Breg knee brace, hand wash all the parts with water and mild soap. Make sure to rinse them thoroughly and dry well before wearing the brace again. When you’re not wearing the brace, fold the Velcro straps back on themselves to prevent debris from sticking to the Velcro.
Remember, while these instructions are specific to a Breg Fusion Knee Brace, you can follow similar guidelines for other Breg knee brace models. A properly fitted and secured knee brace can provide the support and relief you need for a more comfortable and pain-free lifestyle.
Adjusting the Brace for Pain Relief
If you are using an OA brace with an adjustable dial, follow these instructions to find the right level of support and pain relief.
- Start by wearing the brace and adjusting the dial to the lowest setting.
- Gradually increase the dial setting until you feel the desired level of support and pain relief.
- Experiment with different levels of push to find what feels right for you. The brace is designed to unload your knee by pushing on the opposite side, slightly realigning your knee and adjusting weight bearing.
- Remember, it may take some time to find the perfect adjustment, so be patient and make small adjustments as needed.
Custom braces may require a break-in period, like new shoes. Ease yourself into wearing the brace gradually, increasing wear time each day and week. You do not need to wear the brace all the time; wear it when needed.
To care for the brace, hand wash all parts with water and mild soap, then rinse and dry well. Fold the Velcro straps back on themselves when not wearing the brace to prevent debris from sticking to the Velcro.
Adjustment Steps | Benefits |
---|---|
Start with the lowest dial setting | Allows for gentle support and pain relief |
Gradually increase the dial setting | Customize support level to individual needs |
Experiment with different levels of push | Find the perfect adjustment for your knee |
Ease into wearing the brace gradually | Allow your body to adjust comfortably |
Gradual Wear and Care Instructions
Gradually increase wear time and follow proper care instructions to ensure long-lasting use and effectiveness of your Breg knee brace.
When first using your Breg knee brace, it is important to ease yourself into wearing it gradually. Start by wearing the brace for short periods of time, gradually increasing the duration each day and week. This allows your body to adjust to the brace and ensures optimal comfort and support.
Remember, you do not need to wear the brace all the time. Instead, wear it when needed, such as during physical activities or when experiencing discomfort.
In addition to wearing the brace correctly, proper care is essential for maintaining its quality and effectiveness. To clean the brace, hand wash all parts with water and mild soap. Make sure to rinse and dry the brace well to prevent moisture buildup. Folding the Velcro straps back on themselves when not wearing the brace can help prevent debris from sticking to the Velcro, ensuring its longevity.
Table: Breg Knee Brace Care Instructions
Care Step | Instructions |
---|---|
Washing | Hand wash with water and mild soap |
Rinsing | Rinse well to remove all soap residue |
Drying | Allow the brace to air dry completely before storing |
Storage | Fold Velcro straps back on themselves to prevent debris from sticking |
By following these gradual wear and care instructions, you can ensure the long-lasting use and effectiveness of your Breg knee brace. Keep in mind that these instructions are specific to the Breg Fusion Knee Brace, but similar guidelines can generally be followed for other Breg knee brace models.
Additional Care Tips
Proper care and maintenance of your Breg knee brace will ensure its durability and effectiveness. Follow these care instructions to keep your brace in optimal condition:
1. Hand wash all parts of the brace with water and mild soap. Gently scrub the brace with your hands to remove any dirt or debris. Avoid using harsh chemicals or abrasive cleaners as they can damage the brace.
2. After washing, rinse the brace thoroughly to remove any soap residue. Make sure to rinse both the interior and exterior of the brace to ensure cleanliness.
3. Dry the brace well before using or storing it. Use a soft cloth or towel to remove excess moisture. Allow the brace to air dry completely before wearing or storing it to prevent the growth of mold or bacteria.
4. When not wearing the brace, fold the Velcro straps back on themselves. This will prevent debris from sticking to the Velcro and maintain its grip for longer periods. Avoid storing the brace in humid or damp areas to prevent moisture build-up.
By following these care tips, you can extend the lifespan of your Breg knee brace and ensure that it continues to provide the support and stability you need. Remember to consult your healthcare professional for personalized instructions and recommendations based on your specific needs.