Donjoy Knee Brace Fitting

How To Put On Donjoy Knee Brace

No Comments

Photo of author

By Jeff Richardson

Putting on a Donjoy Knee Brace correctly is essential to ensure proper support and comfort while wearing it. Follow these step-by-step instructions to ensure a secure and effective fit:

  • Sit on a stable chair or bench.
  • Secure the bottom calf strap (#1) snugly.
  • Secure the top thigh strap (#2), making sure it is not too tight to prevent the brace from sliding down.
  • Push the hinges slightly back behind the midline of the knee.
  • Secure the back calf strap (#5) comfortably, ensuring the anti-migration band is in place.
  • Secure the anti-migration calf band snugly around the leg, making sure it is in full contact with the leg and not wrapping outside the brace.
  • Check the fit of the brace, ensuring there is no major gapping and the pads make full contact with the leg. If necessary, re-tighten straps or add extra condyle pads.
  • If the brace is too big, loosen all straps, push the hinges back, and raise them slightly up before re-tightening the straps.
  • If the brace is too forward, loosen all straps, raise the hinges up the leg, and re-tighten the straps.
  • If further assistance is required, contact a Donjoy product specialist.

Remember to clean the liners, straps, and pads by hand washing them with water or mild detergent, rinsing well with cold water, and letting them air dry. The brace frame and hinges can be wiped with a damp cloth. Oiling the hinges is not necessary, but if they become difficult to move or do not function normally, they may need to be repaired, which is covered under warranty.

Key Takeaways:

  • Properly putting on a Donjoy Knee Brace is important for optimal support and comfort.
  • Ensure the calf and thigh straps are securely fastened, but not too tight.
  • Position the hinges slightly back behind the midline of the knee.
  • Check the fit of the brace to ensure it is snug and the pads make full contact with the leg.
  • Clean the brace regularly to maintain hygiene and prolong its lifespan.

Steps to Put On a Donjoy Knee Brace

By following these steps, you can easily and quickly put on your Donjoy Knee Brace for optimal support and stability:

  1. Sit on a stable chair or bench.
  2. Secure the bottom calf strap (#1) snugly.
  3. Secure the top thigh strap (#2), making sure it is not too tight to prevent the brace from sliding down.
  4. Push the hinges slightly back behind the midline of the knee.
  5. Secure the back calf strap (#5) comfortably, ensuring the anti-migration band is in place.
  6. Secure the anti-migration calf band snugly around the leg, making sure it is in full contact with the leg and not wrapping outside the brace.
  7. Check the fit of the brace, ensuring there is no major gapping and the pads make full contact with the leg. If necessary, re-tighten straps or add extra condyle pads.
  8. If the brace is too big, loosen all straps, push the hinges back, and raise them slightly up before re-tightening the straps.
  9. If the brace is too forward, loosen all straps, raise the hinges up the leg, and re-tighten the straps.
  10. If further assistance is required, contact a Donjoy product specialist.

Remember to clean the liners, straps, and pads by hand washing them with water or mild detergent, rinsing well with cold water, and letting them air dry. The brace frame and hinges can be wiped with a damp cloth. Oiling the hinges is not necessary, but if they become difficult to move or do not function normally, they may need to be repaired, which is covered under warranty.

Summary:

Putting on a Donjoy Knee Brace is a simple process that begins with sitting on a stable surface. Secure the bottom calf strap snugly, followed by the top thigh strap. Ensure the hinges are positioned slightly behind the midline of the knee and secure the back calf strap. The anti-migration calf band should be snugly wrapped around the leg, in full contact with the leg and not wrapping outside the brace. Check the fit, make necessary adjustments, and seek professional assistance if needed. Don’t forget to clean the brace regularly and wipe the frame and hinges with a damp cloth.

StepInstructions
1Sit on a stable chair or bench.
2Secure the bottom calf strap (#1) snugly.
3Secure the top thigh strap (#2), making sure it is not too tight to prevent the brace from sliding down.
4Push the hinges slightly back behind the midline of the knee.
5Secure the back calf strap (#5) comfortably, ensuring the anti-migration band is in place.
6Secure the anti-migration calf band snugly around the leg, making sure it is in full contact with the leg and not wrapping outside the brace.
7Check the fit of the brace, ensuring there is no major gapping and the pads make full contact with the leg. If necessary, re-tighten straps or add extra condyle pads.
8If the brace is too big, loosen all straps, push the hinges back, and raise them slightly up before re-tightening the straps.
9If the brace is too forward, loosen all straps, raise the hinges up the leg, and re-tighten the straps.
10If further assistance is required, contact a Donjoy product specialist.

Proper Positioning and Fit of the Brace

Positioning and fitting the Donjoy Knee Brace correctly is crucial for its proper functioning and support. Follow these steps to ensure a secure and effective fit:

  1. Sit on a stable chair or bench to begin the fitting process.
  2. Start by securing the bottom calf strap (#1) snugly around your calf. This strap provides stability and prevents the brace from sliding down.
  3. Next, secure the top thigh strap (#2) carefully, ensuring it is not too tight. A properly fitted strap should feel snug but not overly constrictive.
  4. Gently push the hinges slightly back behind the midline of the knee. This positioning promotes proper alignment and allows for natural movement.
  5. Proceed to secure the back calf strap (#5) comfortably, making sure the anti-migration band is in place. This strap helps prevent the brace from shifting during activity.
  6. Ensure the anti-migration calf band is snugly wrapped around the leg, ensuring full contact with the leg and that it is not wrapping outside the brace.
  7. Check the fit of the brace by examining for any major gaps and ensuring the pads make full contact with the leg. If necessary, re-tighten the straps or add extra condyle pads for additional support.
  8. If you find that the brace is too big, loosen all the straps, push the hinges back, and raise them slightly up before re-tightening the straps.
  9. If the brace sits too far forward on your leg, loosen all the straps, raise the hinges up the leg, and then re-tighten the straps.
  10. If you need further assistance with the fitting process, don’t hesitate to contact a Donjoy product specialist for guidance.

Properly maintaining and caring for your Donjoy Knee Brace is essential for its longevity and optimal performance. Hand wash the liners, straps, and pads with water or mild detergent, rinse thoroughly with cold water, and allow them to air dry. You can wipe the brace frame and hinges with a damp cloth. Remember, there is no need to oil the hinges, but if they become difficult to move or function abnormally, they may require repair, which is covered under warranty.

Proper Positioning and Fit Steps
1. Sit on a stable chair or bench.
2. Secure the bottom calf strap (#1) snugly.
3. Secure the top thigh strap (#2), ensuring it is not too tight.
4. Push the hinges slightly back behind the midline of the knee.
5. Secure the back calf strap (#5), ensuring the anti-migration band is in place.
6. Secure the anti-migration calf band snugly around the leg, ensuring full contact with the leg.
7. Check the fit of the brace and adjust as necessary.
8. Clean the liners, straps, and pads by hand washing them with water or mild detergent, rinsing well, and letting them air dry.
9. Wipe the brace frame and hinges with a damp cloth.

Adjustments and Troubleshooting

Sometimes, minor adjustments and troubleshooting might be necessary to ensure a comfortable and secure fit of your Donjoy Knee Brace. Here are some tips and tricks to address common issues:

  1. If you experience discomfort or pressure points, try repositioning the brace by slightly loosening the straps and adjusting the hinges. Check that the pads are aligned correctly and making full contact with your leg.
  2. If the brace feels too loose or slides down, make sure the straps are securely fastened and tightened. Additionally, ensure that the anti-migration calf band is in place and snugly wrapped around your leg.
  3. If you find that the brace is too bulky or restricts your movement, you can remove or add extra condyle pads to customize the fit. These pads provide additional padding and support specific areas of your knee.
  4. In case the brace is rubbing or causing skin irritation, consider applying a thin layer of anti-chafing gel or using moisture-wicking fabric between your skin and the brace. This can help reduce friction and improve overall comfort.

Remember, every individual’s anatomy is unique, and personal adjustments may be necessary to achieve the optimal fit. It is recommended to consult with a healthcare professional or Donjoy product specialist for specific guidance tailored to your needs.

Troubleshooting Tips for Common Issues

If you encounter any of the following issues, here are some troubleshooting tips to address them:

“The brace feels too tight.”

Loosen the straps slightly, ensuring you can still achieve a snug fit without compromising comfort or stability.

“The brace slides down.”

Tighten the straps, paying special attention to the top thigh strap, to prevent the brace from slipping down during activity.

“The brace causes skin irritation.”

Consider using hypoallergenic padding or applying a protective barrier, such as a silicone gel pad or thin cloth, between your skin and the brace.

By following these adjustments and troubleshooting techniques, you can optimize the fit and functionality of your Donjoy Knee Brace, allowing you to engage in your desired activities with confidence and comfort.

IssueTroubleshooting Solution
The brace feels too tight.Loosen the straps slightly to achieve a snug yet comfortable fit.
The brace slides down.Tighten the straps, paying attention to the top thigh strap, to prevent slippage during activity.
The brace causes skin irritation.Use hypoallergenic padding or apply a protective barrier between the brace and your skin, such as silicone gel pads or thin cloth.

Maintenance and Care for Donjoy Knee Brace

Proper maintenance and care are essential to keep your Donjoy Knee Brace secure and in good condition for long-lasting use. Follow these steps to ensure optimal performance:

Clean the liners, straps, and pads: Hand wash them with water or mild detergent, making sure to rinse well with cold water. Afterward, let them air dry to avoid any damage.

Wipe the brace frame and hinges: Use a damp cloth to wipe these components clean. This will help remove any dirt or debris that may have accumulated over time.

Check the hinges: Oiling the hinges is not necessary. However, if you notice that the hinges are difficult to move or not functioning properly, they may require repair. Luckily, this is covered under warranty, so don’t hesitate to reach out to a Donjoy product specialist for assistance.

Ensure proper fitting: Regularly check the fit of the brace by examining for any major gapping or discomfort. If adjustments are needed, re-tighten the straps or consider adding extra condyle pads to achieve a secure and comfortable fit.

By following these maintenance and care tips, you can ensure that your Donjoy Knee Brace remains secure, comfortable, and effective, providing you with the support you need for your knee joint.

Leave a comment